java.lang.Object
- org.opends.server.protocols.ldap.LDAPResultCode

```
public class LDAPResultCode
extends Object
```
This class defines a set of constants that correspond to the result codes defined in the LDAP protocol. Note that many (but not all) of the result codes numbered 81 and higher come from the LDAP C API specification and are only intended for client-side use and should not be returned from the Directory Server. These are denoted with a "CLIENT_SIDE_" prefix.

Field Summary

Fields
Modifier and Type	Field	Description
`static int`	`ADMIN_LIMIT_EXCEEDED`	The LDAP result code for operations that fail as a result of exceeding an administrative limit.
`static int`	`AFFECTS_MULTIPLE_DSAS`	The LDAP result code for operations that fail because the requested operation would have required interaction with multiple DSAs.
`static int`	`ALIAS_DEREFERENCING_PROBLEM`	The LDAP result code for operations that fail because a problem occurred while attempting to dereference an alias.
`static int`	`ALIAS_PROBLEM`	The LDAP result code for operations that fail because the an alias was encountered in an illegal context.
`static int`	`ASSERTION_FAILED`	The LDAP result code for operations that are rejected because the filter in the LDAP assertion control did not match the target entry.
`static int`	`ATTRIBUTE_OR_VALUE_EXISTS`	The LDAP result code for operations that fail because of a conflict with an existing attribute or value.
`static int`	`AUTH_METHOD_NOT_SUPPORTED`	The LDAP result code for operations that fail because the requested authentication method is not supported.
`static int`	`AUTHORIZATION_DENIED`	The LDAP result code for operations that fail because the server refused the client's requested authorization.
`static int`	`BUSY`	The LDAP result code for operations that fail because the server was too busy to process it.
`static int`	`CANCELED`	The LDAP result code for cancel operations that are successful, or for operations that are canceled.
`static int`	`CANNOT_CANCEL`	The LDAP result code for cancel operations that fail because the specified operation cannot be canceled.
`static int`	`CLIENT_SIDE_AUTH_UNKNOWN`	The client-side result code that indicates that the user requested an unknown or unsupported authentication mechanism.
`static int`	`CLIENT_SIDE_CLIENT_LOOP`	The client-side result code that indicates that the client detected a referral loop caused by servers referencing each other in a circular manner.
`static int`	`CLIENT_SIDE_CONNECT_ERROR`	The client-side result code that indicates that the client was not able to establish a connection to the server.
`static int`	`CLIENT_SIDE_CONTROL_NOT_FOUND`	The client-side result code that indicates that the client expected a control to be present in the response from the server but it was not included.
`static int`	`CLIENT_SIDE_DECODING_ERROR`	The client-side result code that indicates that an error occurred while decoding a response from the server.
`static int`	`CLIENT_SIDE_ENCODING_ERROR`	The client-side result code that indicates that an error occurred while encoding a request to send to the server.
`static int`	`CLIENT_SIDE_FILTER_ERROR`	The client-side result code that indicates that the filter provided by the user was malformed and could not be parsed.
`static int`	`CLIENT_SIDE_LOCAL_ERROR`	The client-side result code that indicates that a local error occurred that had nothing to do with interaction with the server.
`static int`	`CLIENT_SIDE_MORE_RESULTS_TO_RETURN`	The client-side result code that indicates that the server has returned more matching entries for a search operation than have been processed so far.
`static int`	`CLIENT_SIDE_NO_MEMORY`	The client-side result code that indicates that the client application was not able to allocate enough memory for the requested operation.
`static int`	`CLIENT_SIDE_NO_RESULTS_RETURNED`	The client-side result code that indicates that the server did not return any results for a search operation that was expected to match at least one entry.
`static int`	`CLIENT_SIDE_NOT_SUPPORTED`	The client-side result code that indicates that the user requested an operation that is not supported.
`static int`	`CLIENT_SIDE_PARAM_ERROR`	The client-side result code that indicates that there was a problem with one or more of the parameters provided by the user.
`static int`	`CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED`	The client-side result code that indicates that the client reached the maximum number of hops allowed when attempting to follow a referral (i.e., following one referral resulted in another referral which resulted in another referral and so on).
`static int`	`CLIENT_SIDE_SERVER_DOWN`	The client-side result code that indicates that a previously-established connection to the server was lost.
`static int`	`CLIENT_SIDE_TIMEOUT`	The client-side result code that indicates that the client did not receive an expected response in a timely manner.
`static int`	`CLIENT_SIDE_USER_CANCELLED`	The client-side result code that indicates that the user cancelled an operation.
`static int`	`COMPARE_FALSE`	The LDAP result code for compare operations in which the assertion is false.
`static int`	`COMPARE_TRUE`	The LDAP result code for compare operations in which the assertion is true.
`static int`	`CONFIDENTIALITY_REQUIRED`	The LDAP result code for operations that fail because confidentiality is required.
`static int`	`CONSTRAINT_VIOLATION`	The LDAP result code for operations that fail because a defined constraint has been violated.
`static int`	`ENTRY_ALREADY_EXISTS`	The LDAP result code for operations that fail because the requested operation would have resulted in an entry that conflicts with one that already exists.
`static int`	`INAPPROPRIATE_AUTHENTICATION`	The LDAP result code for operations that fail because the user attempted to perform a type of authentication that was inappropriate for the targeted entry.
`static int`	`INAPPROPRIATE_MATCHING`	The LDAP result code for operations that fail as a result of attempting an inappropriate form of matching on an attribute.
`static int`	`INSUFFICIENT_ACCESS_RIGHTS`	The LDAP result code for operations that fail because the client does not have permission to perform the requested operation.
`static int`	`INVALID_ATTRIBUTE_SYNTAX`	The LDAP result code for operations that fail because of an invalid attribute syntax.
`static int`	`INVALID_CREDENTIALS`	The LDAP result code for operations that fail because the user supplied invalid credentials for an authentication attempt.
`static int`	`INVALID_DN_SYNTAX`	The LDAP result code for operations that fail because the request included a malformed DN.
`static int`	`LOOP_DETECT`	The LDAP result code for operations that fail because a referral or chaining loop was detected.
`static int`	`NAMING_VIOLATION`	The LDAP result code for operations that fail due to a naming violation.
`static int`	`NO_OPERATION`	The LDAP result code for operations in which no action is taken because the request include the LDAP no-op control.
`static int`	`NO_SUCH_ATTRIBUTE`	The LDAP result code for operations that fail because a specified attribute does not exist.
`static int`	`NO_SUCH_OBJECT`	The LDAP result code for operations that fail because a targeted entry does not exist.
`static int`	`NO_SUCH_OPERATION`	The LDAP result code for cancel operations that fail because the specified operation could not be found.
`static int`	`NOT_ALLOWED_ON_NONLEAF`	The LDAP result code for operations that fail because the requested operation is not allowed on non-leaf entries.
`static int`	`NOT_ALLOWED_ON_RDN`	The LDAP result code for operations that fail because the requested operation is not allowed on an RDN attribute.
`static int`	`OBJECTCLASS_MODS_PROHIBITED`	The LDAP result code for operations that fail because the requested operation attempted to modify objectclass values in an illegal manner.
`static int`	`OBJECTCLASS_VIOLATION`	The LDAP result code for operations that fail because the requested operation would have resulted in an entry that violates the server schema.
`static int`	`OFFSET_RANGE_ERROR`	The LDAP result code for operations that fail because the request included a VLV request control with an invalid offset.
`static int`	`OPERATIONS_ERROR`	The LDAP result code for operations that fail due to an operations error.
`static int`	`OTHER`	The LDAP result code for use in cases in which none of the other defined result codes are appropriate.
`static int`	`PROTOCOL_ERROR`	The LDAP result code for operations that fail due to a protocol error.
`static int`	`REFERRAL`	The LDAP result code for operations that encountered a referral.
`static int`	`SASL_BIND_IN_PROGRESS`	The LDAP result code used for multi-stage SASL bind operations that are not yet complete.
`static int`	`SIZE_LIMIT_EXCEEDED`	The LDAP result code for operations that fail as a result of exceeding a size limit.
`static int`	`SORT_CONTROL_MISSING`	The LDAP result code for operations that fail because the request included a VLV request control without a server-side sort control.
`static int`	`STRONG_AUTH_REQUIRED`	The LDAP result code for operations that fail because strong authentication is required.
`static int`	`SUCCESS`	The LDAP result code for successful operations.
`static int`	`TIME_LIMIT_EXCEEDED`	The LDAP result code for operations that fail as a result of exceeding a time limit.
`static int`	`TOO_LATE`	The LDAP result code for cancel operations that fail because the specified operation has already progressed too far to be canceled.
`static int`	`UNAVAILABLE`	The LDAP result code for operations that fail because the server or a required resource was unavailable.
`static int`	`UNAVAILABLE_CRITICAL_EXTENSION`	The LDAP result code for operations that fail because they contain an unavailable critical extension.
`static int`	`UNDEFINED_ATTRIBUTE_TYPE`	The LDAP result code for operations that fail because a specified attribute type is not defined in the server schema.
`static int`	`UNWILLING_TO_PERFORM`	The LDAP result code for operations that fail because the server was unwilling to perform the requested operation.
`static int`	`VIRTUAL_LIST_VIEW_ERROR`	The LDAP result code for operations that fail due to an error in virtual list view processing.

Constructor Summary

Constructors
Constructor Description

LDAPResultCode()

Method Summary

All Methods Static Methods Concrete Methods
Modifier and Type	Method	Description
`static String`	`toString(int resultCode)`	Retrieves a string representation of the provided LDAP result code.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - SUCCESS
```
public static final int SUCCESS
```
    The LDAP result code for successful operations.
    
    See Also:
    
    Constant Field Values
  - OPERATIONS_ERROR
```
public static final int OPERATIONS_ERROR
```
    The LDAP result code for operations that fail due to an operations error.
    
    See Also:
    
    Constant Field Values
  - PROTOCOL_ERROR
```
public static final int PROTOCOL_ERROR
```
    The LDAP result code for operations that fail due to a protocol error.
    
    See Also:
    
    Constant Field Values
  - TIME_LIMIT_EXCEEDED
```
public static final int TIME_LIMIT_EXCEEDED
```
    The LDAP result code for operations that fail as a result of exceeding a time limit.
    
    See Also:
    
    Constant Field Values
  - SIZE_LIMIT_EXCEEDED
```
public static final int SIZE_LIMIT_EXCEEDED
```
    The LDAP result code for operations that fail as a result of exceeding a size limit.
    
    See Also:
    
    Constant Field Values
  - COMPARE_FALSE
```
public static final int COMPARE_FALSE
```
    The LDAP result code for compare operations in which the assertion is false.
    
    See Also:
    
    Constant Field Values
  - COMPARE_TRUE
```
public static final int COMPARE_TRUE
```
    The LDAP result code for compare operations in which the assertion is true.
    
    See Also:
    
    Constant Field Values
  - AUTH_METHOD_NOT_SUPPORTED
```
public static final int AUTH_METHOD_NOT_SUPPORTED
```
    The LDAP result code for operations that fail because the requested authentication method is not supported.
    
    See Also:
    
    Constant Field Values
  - STRONG_AUTH_REQUIRED
```
public static final int STRONG_AUTH_REQUIRED
```
    The LDAP result code for operations that fail because strong authentication is required.
    
    See Also:
    
    Constant Field Values
  - REFERRAL
```
public static final int REFERRAL
```
    The LDAP result code for operations that encountered a referral.
    
    See Also:
    
    Constant Field Values
  - ADMIN_LIMIT_EXCEEDED
```
public static final int ADMIN_LIMIT_EXCEEDED
```
    The LDAP result code for operations that fail as a result of exceeding an administrative limit.
    
    See Also:
    
    Constant Field Values
  - UNAVAILABLE_CRITICAL_EXTENSION
```
public static final int UNAVAILABLE_CRITICAL_EXTENSION
```
    The LDAP result code for operations that fail because they contain an unavailable critical extension.
    
    See Also:
    
    Constant Field Values
  - CONFIDENTIALITY_REQUIRED
```
public static final int CONFIDENTIALITY_REQUIRED
```
    The LDAP result code for operations that fail because confidentiality is required.
    
    See Also:
    
    Constant Field Values
  - SASL_BIND_IN_PROGRESS
```
public static final int SASL_BIND_IN_PROGRESS
```
    The LDAP result code used for multi-stage SASL bind operations that are not yet complete.
    
    See Also:
    
    Constant Field Values
  - NO_SUCH_ATTRIBUTE
```
public static final int NO_SUCH_ATTRIBUTE
```
    The LDAP result code for operations that fail because a specified attribute does not exist.
    
    See Also:
    
    Constant Field Values
  - UNDEFINED_ATTRIBUTE_TYPE
```
public static final int UNDEFINED_ATTRIBUTE_TYPE
```
    The LDAP result code for operations that fail because a specified attribute type is not defined in the server schema.
    
    See Also:
    
    Constant Field Values
  - INAPPROPRIATE_MATCHING
```
public static final int INAPPROPRIATE_MATCHING
```
    The LDAP result code for operations that fail as a result of attempting an inappropriate form of matching on an attribute.
    
    See Also:
    
    Constant Field Values
  - CONSTRAINT_VIOLATION
```
public static final int CONSTRAINT_VIOLATION
```
    The LDAP result code for operations that fail because a defined constraint has been violated.
    
    See Also:
    
    Constant Field Values
  - ATTRIBUTE_OR_VALUE_EXISTS
```
public static final int ATTRIBUTE_OR_VALUE_EXISTS
```
    The LDAP result code for operations that fail because of a conflict with an existing attribute or value.
    
    See Also:
    
    Constant Field Values
  - INVALID_ATTRIBUTE_SYNTAX
```
public static final int INVALID_ATTRIBUTE_SYNTAX
```
    The LDAP result code for operations that fail because of an invalid attribute syntax.
    
    See Also:
    
    Constant Field Values
  - NO_SUCH_OBJECT
```
public static final int NO_SUCH_OBJECT
```
    The LDAP result code for operations that fail because a targeted entry does not exist.
    
    See Also:
    
    Constant Field Values
  - ALIAS_PROBLEM
```
public static final int ALIAS_PROBLEM
```
    The LDAP result code for operations that fail because the an alias was encountered in an illegal context.
    
    See Also:
    
    Constant Field Values
  - INVALID_DN_SYNTAX
```
public static final int INVALID_DN_SYNTAX
```
    The LDAP result code for operations that fail because the request included a malformed DN.
    
    See Also:
    
    Constant Field Values
  - ALIAS_DEREFERENCING_PROBLEM
```
public static final int ALIAS_DEREFERENCING_PROBLEM
```
    The LDAP result code for operations that fail because a problem occurred while attempting to dereference an alias.
    
    See Also:
    
    Constant Field Values
  - INAPPROPRIATE_AUTHENTICATION
```
public static final int INAPPROPRIATE_AUTHENTICATION
```
    The LDAP result code for operations that fail because the user attempted to perform a type of authentication that was inappropriate for the targeted entry.
    
    See Also:
    
    Constant Field Values
  - INVALID_CREDENTIALS
```
public static final int INVALID_CREDENTIALS
```
    The LDAP result code for operations that fail because the user supplied invalid credentials for an authentication attempt.
    
    See Also:
    
    Constant Field Values
  - INSUFFICIENT_ACCESS_RIGHTS
```
public static final int INSUFFICIENT_ACCESS_RIGHTS
```
    The LDAP result code for operations that fail because the client does not have permission to perform the requested operation.
    
    See Also:
    
    Constant Field Values
  - BUSY
```
public static final int BUSY
```
    The LDAP result code for operations that fail because the server was too busy to process it.
    
    See Also:
    
    Constant Field Values
  - UNAVAILABLE
```
public static final int UNAVAILABLE
```
    The LDAP result code for operations that fail because the server or a required resource was unavailable.
    
    See Also:
    
    Constant Field Values
  - UNWILLING_TO_PERFORM
```
public static final int UNWILLING_TO_PERFORM
```
    The LDAP result code for operations that fail because the server was unwilling to perform the requested operation.
    
    See Also:
    
    Constant Field Values
  - LOOP_DETECT
```
public static final int LOOP_DETECT
```
    The LDAP result code for operations that fail because a referral or chaining loop was detected.
    
    See Also:
    
    Constant Field Values
  - SORT_CONTROL_MISSING
```
public static final int SORT_CONTROL_MISSING
```
    The LDAP result code for operations that fail because the request included a VLV request control without a server-side sort control.
    
    See Also:
    
    Constant Field Values
  - OFFSET_RANGE_ERROR
```
public static final int OFFSET_RANGE_ERROR
```
    The LDAP result code for operations that fail because the request included a VLV request control with an invalid offset.
    
    See Also:
    
    Constant Field Values
  - NAMING_VIOLATION
```
public static final int NAMING_VIOLATION
```
    The LDAP result code for operations that fail due to a naming violation.
    
    See Also:
    
    Constant Field Values
  - OBJECTCLASS_VIOLATION
```
public static final int OBJECTCLASS_VIOLATION
```
    The LDAP result code for operations that fail because the requested operation would have resulted in an entry that violates the server schema.
    
    See Also:
    
    Constant Field Values
  - NOT_ALLOWED_ON_NONLEAF
```
public static final int NOT_ALLOWED_ON_NONLEAF
```
    The LDAP result code for operations that fail because the requested operation is not allowed on non-leaf entries.
    
    See Also:
    
    Constant Field Values
  - NOT_ALLOWED_ON_RDN
```
public static final int NOT_ALLOWED_ON_RDN
```
    The LDAP result code for operations that fail because the requested operation is not allowed on an RDN attribute.
    
    See Also:
    
    Constant Field Values
  - ENTRY_ALREADY_EXISTS
```
public static final int ENTRY_ALREADY_EXISTS
```
    The LDAP result code for operations that fail because the requested operation would have resulted in an entry that conflicts with one that already exists.
    
    See Also:
    
    Constant Field Values
  - OBJECTCLASS_MODS_PROHIBITED
```
public static final int OBJECTCLASS_MODS_PROHIBITED
```
    The LDAP result code for operations that fail because the requested operation attempted to modify objectclass values in an illegal manner.
    
    See Also:
    
    Constant Field Values
  - AFFECTS_MULTIPLE_DSAS
```
public static final int AFFECTS_MULTIPLE_DSAS
```
    The LDAP result code for operations that fail because the requested operation would have required interaction with multiple DSAs.
    
    See Also:
    
    Constant Field Values
  - VIRTUAL_LIST_VIEW_ERROR
```
public static final int VIRTUAL_LIST_VIEW_ERROR
```
    The LDAP result code for operations that fail due to an error in virtual list view processing.
    
    See Also:
    
    Constant Field Values
  - OTHER
```
public static final int OTHER
```
    The LDAP result code for use in cases in which none of the other defined result codes are appropriate.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_SERVER_DOWN
```
public static final int CLIENT_SIDE_SERVER_DOWN
```
    The client-side result code that indicates that a previously-established connection to the server was lost. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_LOCAL_ERROR
```
public static final int CLIENT_SIDE_LOCAL_ERROR
```
    The client-side result code that indicates that a local error occurred that had nothing to do with interaction with the server. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_ENCODING_ERROR
```
public static final int CLIENT_SIDE_ENCODING_ERROR
```
    The client-side result code that indicates that an error occurred while encoding a request to send to the server. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_DECODING_ERROR
```
public static final int CLIENT_SIDE_DECODING_ERROR
```
    The client-side result code that indicates that an error occurred while decoding a response from the server. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_TIMEOUT
```
public static final int CLIENT_SIDE_TIMEOUT
```
    The client-side result code that indicates that the client did not receive an expected response in a timely manner. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_AUTH_UNKNOWN
```
public static final int CLIENT_SIDE_AUTH_UNKNOWN
```
    The client-side result code that indicates that the user requested an unknown or unsupported authentication mechanism. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_FILTER_ERROR
```
public static final int CLIENT_SIDE_FILTER_ERROR
```
    The client-side result code that indicates that the filter provided by the user was malformed and could not be parsed. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_USER_CANCELLED
```
public static final int CLIENT_SIDE_USER_CANCELLED
```
    The client-side result code that indicates that the user cancelled an operation. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_PARAM_ERROR
```
public static final int CLIENT_SIDE_PARAM_ERROR
```
    The client-side result code that indicates that there was a problem with one or more of the parameters provided by the user. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_NO_MEMORY
```
public static final int CLIENT_SIDE_NO_MEMORY
```
    The client-side result code that indicates that the client application was not able to allocate enough memory for the requested operation. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_CONNECT_ERROR
```
public static final int CLIENT_SIDE_CONNECT_ERROR
```
    The client-side result code that indicates that the client was not able to establish a connection to the server. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_NOT_SUPPORTED
```
public static final int CLIENT_SIDE_NOT_SUPPORTED
```
    The client-side result code that indicates that the user requested an operation that is not supported. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_CONTROL_NOT_FOUND
```
public static final int CLIENT_SIDE_CONTROL_NOT_FOUND
```
    The client-side result code that indicates that the client expected a control to be present in the response from the server but it was not included. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_NO_RESULTS_RETURNED
```
public static final int CLIENT_SIDE_NO_RESULTS_RETURNED
```
    The client-side result code that indicates that the server did not return any results for a search operation that was expected to match at least one entry. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_MORE_RESULTS_TO_RETURN
```
public static final int CLIENT_SIDE_MORE_RESULTS_TO_RETURN
```
    The client-side result code that indicates that the server has returned more matching entries for a search operation than have been processed so far. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_CLIENT_LOOP
```
public static final int CLIENT_SIDE_CLIENT_LOOP
```
    The client-side result code that indicates that the client detected a referral loop caused by servers referencing each other in a circular manner. This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED
```
public static final int CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED
```
    The client-side result code that indicates that the client reached the maximum number of hops allowed when attempting to follow a referral (i.e., following one referral resulted in another referral which resulted in another referral and so on). This is for client-side use only and should never be transferred over protocol.
    
    See Also:
    
    Constant Field Values
  - CANCELED
```
public static final int CANCELED
```
    The LDAP result code for cancel operations that are successful, or for operations that are canceled.
    
    See Also:
    
    Constant Field Values
  - NO_SUCH_OPERATION
```
public static final int NO_SUCH_OPERATION
```
    The LDAP result code for cancel operations that fail because the specified operation could not be found.
    
    See Also:
    
    Constant Field Values
  - TOO_LATE
```
public static final int TOO_LATE
```
    The LDAP result code for cancel operations that fail because the specified operation has already progressed too far to be canceled.
    
    See Also:
    
    Constant Field Values
  - CANNOT_CANCEL
```
public static final int CANNOT_CANCEL
```
    The LDAP result code for cancel operations that fail because the specified operation cannot be canceled.
    
    See Also:
    
    Constant Field Values
  - ASSERTION_FAILED
```
public static final int ASSERTION_FAILED
```
    The LDAP result code for operations that are rejected because the filter in the LDAP assertion control did not match the target entry.
    
    See Also:
    
    Constant Field Values
  - AUTHORIZATION_DENIED
```
public static final int AUTHORIZATION_DENIED
```
    The LDAP result code for operations that fail because the server refused the client's requested authorization.
    
    See Also:
    
    Constant Field Values
  - NO_OPERATION
```
public static final int NO_OPERATION
```
    The LDAP result code for operations in which no action is taken because the request include the LDAP no-op control. FIXME -- This is a temporary result code for use until draft-zeilenga-ldap-noop is updated and an official result code is allocated for it. In the meantime, this result appears to be the one used by OpenLDAP as per the message at http://www.openldap.org/lists/openldap-devel/200601/msg00143.html (0x410e = 16654).
    
    See Also:
    
    Constant Field Values
- Constructor Detail
  - LDAPResultCode
```
public LDAPResultCode()
```
- Method Detail
  - toString
```
public static String toString(int resultCode)
```
    Retrieves a string representation of the provided LDAP result code.
    
    Parameters:
    
    resultCode - The LDAP result code value for which to obtain the string representation.
    
    Returns:
    
    The string representation of the provided LDAP result code.

Class LDAPResultCode

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

SUCCESS

OPERATIONS_ERROR

PROTOCOL_ERROR

TIME_LIMIT_EXCEEDED

SIZE_LIMIT_EXCEEDED

COMPARE_FALSE

COMPARE_TRUE

AUTH_METHOD_NOT_SUPPORTED

STRONG_AUTH_REQUIRED

REFERRAL

ADMIN_LIMIT_EXCEEDED

UNAVAILABLE_CRITICAL_EXTENSION

CONFIDENTIALITY_REQUIRED

SASL_BIND_IN_PROGRESS

NO_SUCH_ATTRIBUTE

UNDEFINED_ATTRIBUTE_TYPE

INAPPROPRIATE_MATCHING

CONSTRAINT_VIOLATION

ATTRIBUTE_OR_VALUE_EXISTS

INVALID_ATTRIBUTE_SYNTAX

NO_SUCH_OBJECT

ALIAS_PROBLEM

INVALID_DN_SYNTAX

ALIAS_DEREFERENCING_PROBLEM

INAPPROPRIATE_AUTHENTICATION

INVALID_CREDENTIALS

INSUFFICIENT_ACCESS_RIGHTS

BUSY

UNAVAILABLE

UNWILLING_TO_PERFORM

LOOP_DETECT

SORT_CONTROL_MISSING

OFFSET_RANGE_ERROR

NAMING_VIOLATION

OBJECTCLASS_VIOLATION

NOT_ALLOWED_ON_NONLEAF

NOT_ALLOWED_ON_RDN

ENTRY_ALREADY_EXISTS

OBJECTCLASS_MODS_PROHIBITED

AFFECTS_MULTIPLE_DSAS

VIRTUAL_LIST_VIEW_ERROR

OTHER

CLIENT_SIDE_SERVER_DOWN

CLIENT_SIDE_LOCAL_ERROR

CLIENT_SIDE_ENCODING_ERROR

CLIENT_SIDE_DECODING_ERROR

CLIENT_SIDE_TIMEOUT

CLIENT_SIDE_AUTH_UNKNOWN

CLIENT_SIDE_FILTER_ERROR

CLIENT_SIDE_USER_CANCELLED

CLIENT_SIDE_PARAM_ERROR

CLIENT_SIDE_NO_MEMORY

CLIENT_SIDE_CONNECT_ERROR

CLIENT_SIDE_NOT_SUPPORTED

CLIENT_SIDE_CONTROL_NOT_FOUND

CLIENT_SIDE_NO_RESULTS_RETURNED

CLIENT_SIDE_MORE_RESULTS_TO_RETURN

CLIENT_SIDE_CLIENT_LOOP

CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED

CANCELED

NO_SUCH_OPERATION

TOO_LATE

CANNOT_CANCEL

ASSERTION_FAILED

AUTHORIZATION_DENIED

NO_OPERATION

Constructor Detail

LDAPResultCode

Method Detail

toString